Friday, September 6, 2019

Fast Food Nation Essay Example for Free

Fast Food Nation Essay Fast Food Is Linked to Obesity and Other Serious Health Problems Fast Food , 2009 Seth Stern is a staff writer at The Christian Science Monitor. Despite the fact that nutritional information about fast food is readily available, many fast food chains are taking the blame for the rise in obesity and other health problems across the nation. Some lawyers are considering the possibility that fast food chains could be held accountable for the health consequences of eating their food. The chains could also be responsible for the effects of their potentially misleading advertising, especially to children. These advertising messages can lead people to overeat, which is one of the reasons behind the obesity problem. For decades, Caesar Barber ate hamburgers four or five times a week at his favorite fast-food restaurants, visits that didnt end even after his first heart attack. But his appetite for fast food didnt stop Mr. Barber, who is 5 foot 10 and weighs 272 pounds, from suing four chains last month, claiming they contributed to his health problems by serving fatty foods. Legal Matters Even the most charitable legal experts give Barber little chance of succeeding. But his suit is just the latest sign that the Big Mac may eventually rival Big Tobacco as public health enemy No. 1 in the nations courts. Lawyers who successfully challenged cigarette manufacturers have joined with nutritionists to explore whether the producers of all those supersize fries and triple cheeseburgers can be held liable for Americas bulging waistlines. Prompted by reports that the nations obesity is getting worse, lawyers as well as nutrition, marketing, and industry economics experts will come together at a conference at Northeastern University in Boston to discuss possible legal strategies. Obesity can be linked to some 300,000 deaths and $117 billion in health care costs a year. Theyre looking at whether food industry marketing—particularly messages aimed at kids—may be misleading or downright deceptive under consumer protection laws, says Richard Daynard, a Northeastern law professor and chair of its Tobacco Products Liability Project. Theyll also consider the more complex question of whether the producers of fatty foods—and even the public schools that sell them—should be held responsible for the health consequences of eating them. A Toxic Food Environment Medical professionals argue that too much unhealthy food is sold by using tempting messages that encourage overeating. People are exposed to a toxic food environment, says Kelly Brownell of Yales Center for Eating and Weight Disorders. It really is an emergency. The figures are certainly startling. Obesity can be linked to some 300,000 deaths and $117 billion in health care costs a year, a report by the Surgeon General found [in 2001]. Such numbers prompted President [George W.] Bush to launch his own war on fat this summer [in 2002], calling on all Americans to get 30 minutes of physical activity each day. But fast-food industry representatives are quick to say, Dont just blame us. Steven Anderson, president of the National Restaurant Association, a trade group, says attorneys who attempt to compare the health risk of tobacco with those of fast food are following a tortuous and twisted logic. All of these foods will fit into [the] diet of most Americans with proper moderation and balance, he says. To be sure, there are big differences between tackling food and tobacco. Any amount of tobacco consumption is dangerous but everyone has to eat, Mr. Daynard says. And few if any foods are inherently toxic. Whats more, while there were only four or five tobacco manufacturers, there are thousands of food manufacturers and restaurants serving some 320,000 different products, says Marion Nestle, a professor of nutrition and food studies at New York University. People usually smoke one brand of cigarette. They eat in many restaurants and eat the same foods at home. That makes it almost impossible to prove that a persons obesity or health problems are caused by a particular food or restaurant. As a result, suits such as Barbers that attempt to pin the blame for weight-related problems on specific plaintiffs will run into difficulty in court, says Steven Sugarman, a law professor at the University of California, Berkeley. Suits by state attorneys general to try to recover the cost of treating obese patients, a tactic thats worked with tobacco, also could prove tough. Deceptive Advertising. Thats why lawyers are focusing on more modest suits aimed at advertising and marketing techniques, says John Banzhaf III, a George Washington University law professor who helped initiate the tobacco litigation three decades ago. For example, students in one of Professor Banzhafs courses helped sue McDonalds [in 2000] for advertising its french fries as vegetarian even though the company continued to use beef fat in their preparation. The company agreed to donate $10 million to Hindu and vegetarian groups as part of a settlement. But only in the past few months has Banzhaf considered similar suits as part of a concerted strategy to sue the food industry for false or deceptive advertising as a way of fighting Americans obesity. State consumer-protection laws require sellers to disclose clearly all important facts about their products. Just as a sweater manufacturer should disclose that it may shrink in the wash, Banzhaf says fast-food companies might have an obligation to disclose that a meal has more fat than the recommended daily allowance. Such class-action suits on behalf of people deceived by advertisements could recover the amounts customers spent on the food items but not money spent on related health costs. As with tobacco, marketing aimed at kids will be a particular focus of Banzhaf and his coalition of lawyers and nutritionists. Everybody is looking at children as the vulnerable point in this, says Dr. Nestle. She says shes received loads of e-mails and calls from plaintiff lawyers interested in advice since publishing Food Politics, a book critical of the food industrys marketing and its dominant role in shaping nutritional guidelines. While they know a quarter pounder is not a health food, a lot of people would be surprised to learn it uses up a whole day of calories for women. At a meeting in Boston [August 2002], Banzhaf said attorneys talked about suing Massachusetts school districts that sell fast food in their cafeterias or stock soda in their vending machines. These suits would be based on the legal notion that schools have a higher duty of care than restaurants. Fast-food restaurant chains, for their part, say theyre not hiding whats in their food. At Burger King, for example, nutritional information is supposed to be posted in every dining room. And on its website, Wendys lists 15 categories of information about its products, including total fat and calories for everything from the whole sandwich down to the pickles. Nutritionists say that the information doesnt put the calories in a context people can understand. While they know a quarter pounder is not a health food, a lot of people would be surprised to learn it uses up a whole day of calories for women, says Margo Wootan of the Center for Science in the Public Interest in Washington. Banzhaf acknowledges that litigation alone wont get Americans in better shape. Hed like nutritional information on the fast-food menu boards and wrappers or even health warnings similar to the ones now required on cigarettes. Still, Banzhaf says litigation will put producers of fatty foods on notice. When we first proposed smoker suits, people laughed too. Further Readings Books Paul Campos The Diet Myth: Why Americas Obsession with Weight Is Hazardous to Your Health. New York: Gotham, 2006. Autumn Libel Fats, Sugars, and Empty Calories: The Fast Food Habit. Philadelphia: Mason Crest, 2006. Gina Mallet Last Chance to Eat: The Fate of Taste in a Fast Food World. New York: Norton, 2004. J. Eric Oliver Fat Politics: The Real Story Behind Americas Obesity Epidemic. New York: Oxford University Press, 2006. George Ritzer McDonaldization of Society 5. Los Angeles: Pine Forge, 2008. Eric Schlosser Fast Food Nation: The Dark Side of the All-American Meal. New York: HarperPerennial, 2005. Eric Schlosser and Charles Wilson Chew on This: Everything You Dont Want to Know About Fast Food. Boston: Houghton Mifflin, 2006. Michele Simon Appetite for Profit: How the Food Industry Undermines Our Health and How to Fight Back. New York: Nation Books, 2006. Andrew F. Smith Encyclopedia of Junk and Fast Food. Westport, CT: Greenwood, 2006. Morgan Spurlock Dont Eat This Book: Fast Food and the Supersizing of America. New York: G. P. Putnams Sons, 2005. Jennifer Parker Talwar Fast Food, Fast Track: Immigrants, Big Business, and the American Dream. Boulder, CO: Westview, 2003. Tina Volpe The Fast Food Craze: Wreaking Havoc on Our Bodies and Our Animals. Kagel Canyon, CA: Canyon, 2005. Periodicals Frank Bruni Life in the Fast-Food Lane, New York Times, May 24, 2006. Steve Chapman Force-Fed the Facts, Reason, June 23, 2008. Temple Grandin Special Report: Maintenance of Good Animal Welfare in Beef Slaughter Plants by Use of Auditing Programs, Journal of the American Veterinary Medical Association, February 1, 2005. Anne Kingston and Nicholas Kohler L. A. s Fast Food Drive-by: A City Councils Ban on Fast-Food Chains Is a Provocative Social Experiment, Macleans, August 25, 2008. Laura Kipnis Americas Waistline, Slate, October 28, 2005. www. slate. com.Amelia Levin Good Food Fast, Foodservice Equipment Supplies, October 1, 2006. Sarah More McCann Wanted: Inner-City Supermarkets, Christian Science Monitor, June 27, 2008. Ruth Mortimer Why Fast-Food Brands Should Not Change Their Recipe for Success, Marketing Week, August 28, 2008. Evelyn Nieves Fla. Tomato Pickers Still Reap Harvest of Shame,' Washington Post, February 28, 2005. Jennifer Ordonez Fast-Food Lovers, Unite! Newsweek, May 24, 2004. Jonathan Rosenblum Fast Food Nation Interview: Eric Schlosser on Obesity, Kids, and Fast-Food PR, PR Watch, November 17, 2006.www. prwatch. org. Gary Ruskin and Juliet Schor Junk Food Nation, Nation, August 29, 2005. William Saletan Junk-Food Jihad, Slate, April 15, 2006. www. slate. com. San Francisco Chronicle Battle of the Bulge: Fast Food Is King at Arroyo High, June 29, 2003. Morgan Spurlock The Truth About McDonalds and Children, Independent (London), May 22, 2005. Full Text: COPYRIGHT 2005 Gale, COPYRIGHT 2006 Gale. Source Citation Stern, Seth. Fast Food Is Linked to Obesity and Other Serious Health Problems. Fast Food. Ed. Tracy Brown Collins. San Diego: Greenhaven Press, 2005. At Issue. Rpt.from Fast-Food Restaurants Face Legal Grilling. The Christian Science Monitor. 2002. Gale Opposing Viewpoints In Context. Web. 28 Aug. 2012. Document URL http://ic. galegroup. com. ezproxy. taftcollege. edu/ic/ovic/ViewpointsDetailsPage/Vi ewpointsDetailsWindow? failOverType=query=prodId=OVICwindowstate=n ormalcontentModules=mode=viewdisplayGroupName=Viewpointslimi ter=currPage=disableHighlighting=falsesource=sortBy=dis playGroups=action=ecatId=activityType=scanId=documentId =GALE%7CEJ3010311212userGroupName=taftcoll_mainjsid=3f16b8df6b867664f0 b4be12be1db146 Gale Document Number: GALE|EJ3010311212.

Thursday, September 5, 2019

Post Op Protection Helmet Project Health And Social Care Essay

Post Op Protection Helmet Project Health And Social Care Essay Introduction Most of the patients who had undergone any major head surgery will require an effective protection of their wound. After surgery, some patients especially post-traumatic injury have a high risk of falling due to neurological impairments, weakness, post-op seizures and agitation or confusion and re-injure their head. This is more important if part of the patients skull is removed (craniectomy). Appropriate protective headwear during the acute period post-op can be worn and reduce the chance of injury. While effective protection for the head and face is a priority for these individuals, headwear should also provide unobstructed vision and adequate ventilation, lightweight, cosmetically acceptable and reasonably priced. Providing effective headwear is a problem for many orthotists and the rehabilitation team taking care of individuals who have a high risk of head injury following a fall. Parents, caregivers and clinicians usually opt to use commercial sports helmets or other types of ad justable off-the-shelf headwear. Although commercial helmets are adaptable and relatively inexpensive, a number of features make them generally unsuitable for the disabled population post-operation. The main idea for this protection helmet is to provide a comfortable wear for the patient and reduce risk of injuring the head and wound during inpatient period. In other way, the design should be able to minimize the impact to the head if a fall or knock occurs. Chapter 2: LITERITURE RIVIEW Human brain can withstand 300 to 400 G of impact without either concussion or skull fracture, provided that there is no local deformation of the skull to inflict direct injury. Patients sometimes ha head surgery that needed to remove some part of their skull. This will make impact that brain can withstand lower than original. Thus, the helmet protection for post operative will be needed. 2.1 Review Journal According to Understanding Head Neck Trauma by Tony Pan Sanfelipo, the impact that head can withstand is vary from the location that the forces is being exerted. The frontal bone (forehead) can withstand on average, 1,000 to 1,600 pounds of force. The temporo-parietal (sides of head) bones can tolerate around 700 to 1,900 pounds of force. The back of the skull can handle around 1,440 pounds of force. The bones of the face and cheek are less tolerant, standing forces of only 280 to 520 pounds. From this, we can see that the impact that head can withstand is differ from the impact that brain can withstand. Skull is a very strong bone in our skeletal system. But, caution step also needed to be done especially after the head operation. According to the Journal of Prosthetic and Orthotic entitled The Use of Postoperative Cranial Orthoses in the Management of Craniosynostosis by William J. Barringer, head helmet or cranial orthoses was being widely used in child rehabilitation after having a head surgery of the problem craniosynostosis that is a condition for cranial deformity that can be directly related to the premature closure of cranial sutures. According to the writer, the cause of the problem is still unknown. While in the other Journal of Prosthetic and Orthotic entitled An Overview of Positional Plagiocephaly and Cranial Remolding Orthoses by Deanna Fish and Dulcey Lima, said that plagiocephaly is a condition of abnormalities of baby head due to pre-natal and post-natal forces exerted to the head of the baby makes the baby head look weird. The causes of these problem are varied like the head could be shape like that before birth (that is still in the womb), the position of the baby during sleep that make some deformation force, the premature birth of the baby and maybe the supine position of the baby during daytime also can cause this problem. Both of these problems involve head remodification. For plagioencephaly, the method to remodel back the head is by using a head helmet or cranial remolding orthoses. It was being called Cranial remolding techniques. This technique was being applied by cover all the areas that need to be curb by a material and allows space in areas where growth is to be encouraged to promote the desired head shape. The material being used to cover the head is often built like head helmet but not as thick as the normal helmet. The example of the material is polypropylene. While craniosynostotis involved head surgery to shape back their head. Often also used as a treatment after the surgery is the head orthoses. According to William J. Barringer, the patient that used the orthoses after the surgery more likely to have the shape of the head almost regained normal. According to the author, based on the survey that he had made, he concluded that many advantages that the patient can get by putting on these ortoses after head surgey for craniosnostotis patients like it appears that orthoses can be used to extend the correction gained in surgery or to protect against regression to the presurgical deformit. It is also apparent that age, severity of deformity, type of deformity, surgical procedure, physician preference, and bone healing play important roles in determining the overall outcome and decision-making. According to the author also, there are many ways, material and shape of the head orthoses can be made. An example is a head orthoses that using bends materials that attach the part together. While the authors for the An Overview of Positional Plagiocephaly and Cranial Remolding Orthoses article said that many different orthotic designs have been developed during the last 20 years to effectively address this patient population. Whether the design is active or passive in nature, rigid or flexible, hinged or circumferential, the basic principle of all cranial remolding orthoses is to create a pathway for symmetrical growth to occur. The authors also quoted that there are several ways to make the cranial orthoses. A cast or three-dimensional image of the infants head is acquired. The model is modified to full or partial symmetry, depending upon the severity of the condition, design of the orthoses, and protocols of the treating orthotist. Mild and moderate asymmetries may be modified to full symmetry while severe deformations may require progressive adjustments to the inner surface of the orthoses to obtain full symmetry throughout the course of the treatment program. Orthot ic designs including chinstraps are likely to be less intimate at the initial fitting, allowing for normal growth to follow the internal contours of the orthoses. To date, there is no evidence that any one orthotic design provides better outcomes than another. Symmetrical growth is achieved by consistent evaluation and adjustments to the orthoses based upon the childs head shape and growth patterns. Translational movements of the cranial bones are to be expected and frequent evaluation will ensure total contact over prominent areas and provide areas of relief over depressed areas. Circumferential growth is accommodated by the removal or recontouring of material and additional material may be strategically added to provide total contact and to stabilize the orthoses on the infants head. It is extremely important for the orthoses to be thoroughly cleaned each day to prevent bacterial build-up and problems with scalp rashes. Air holes are commonly added to help dissipate heat as well a s to assist in the evaluation of the fit of the cranium to the inner surface of the orthoses. Due to its functional as regain head shape, the cranial orthoses model had to be some sort of medical device that should not affect the patient in bad ways. The U.S. Food and Drug Administration (FDA) has certain aspect that cranial remodeling orthoses and other medical device manufacturer had to pass before patients can used their model in United State of America. To obtain clearance, manufacturers are required to explain the design of the product(s), how they are intended to work, and how they are manufactured. They are also required to describe the treatment protocols, provide appropriate labeling, and market the devices for only approved uses. All manufacturers must undergo regular FDA audits of their facilities and must comply with the Medical Device Reporting requirements to report any device failure that could lead to serious injury or death. This is being taken from Journal of Prosthetic and Orthotic entitled FDA Regulation of Cranial Remodeling Devices by Timothy R. Littlefi eld. 2.2 Disadvantages of The Older Design While cranial remolding orthoses is for children, others research had been done to make cranial orthoses for needed patient after head surgery whether the patients is children or adults. The design should be lightweight, effective and protect the head better. According to Journal of Prosthetic and Orthotic entitled Development of a Modular Design, Custom-Fitted Protective Helmet by Steve Ryan,Greg Belbin, Mendal Slack, Stephen Naumann and Rod Moran, stated that the new design by them trough this project should be assign because there are many disadvantages of the already have design like: Commercial helmets protect the cranium but leave the facial area, particularly the chin and oral structure, vulnerable. Commercial face shields could provide the extra protection, but they may impede vision and add to a caged in feeling. In addition, because of a face shields remote placement, it could contribute to neck injury if caught on a stationary object during a fall. Usually commercial helmets are designed with ventilation slots and liner cooling paths, which are conduits for forced air movement through the helmet. Cooling occurs as the wearer moves. This form of ventilation is inefficient for the disabled population since, for the most part, they move at or below normal walking speed. Suspension in commercial headwear is provided primarily by a chin cup attached to the helmet by straps, which are tightened to prevent helmet movement. Constant pressure applied to the chin could lead to orthodontic problems, particularly in the growing child. Because of these, they proposed new design for the cranial orthoses. Their design is mainly focused of three parts of the head that are anterior section, posterior section and chin protector. Each part are fabricated from polyethylene foam with the exterior is hard polyethylene while the anterior is low-density polyethylene foam. They fabricate the orthoses and made a survey of it. The result from the survey is the research helmet was found to be an orthotic device that could be readily dispensed in a clinical setting in one appointment. On average, it required two hours to measure, evaluate and fit a subject. The project orthotists felt that, with experience, the helmet could be fitted in less than two hours except in cases where special modifications were required. The orthotists remarked on the ease with which they could dispense the helmet using the specially designed jigs and fixtures provided. No major technical problems or mechanical failures were identified during the helmets post-trial evaluation. This is being sited on their article. 2.3 Summary Last but not least, we proposed the title of our clinical project Post-OP Protection Helmet to help patients head after surgery minimize the risk of reinjuring their head due to possible fall during acute period. Several factors like Post-traumatic, seizure, confusion, agitation and imbalance can lead to knocking their head accidently at the skull defect site. With this device, patient can protect their head especially. For our design, we applied the basic concepts of engineering like the concepts of energy absorption and load distribution and also biomechanics application. Chapter 3: Methodology 3.1 Technique used There are two ways of technique we performed our task. Firstly, we used AutoCAD Engineering software to design the shape of the helmet. We used this software because it can perform the shape clearly and make the 3D dimension. We have to consider the convenience and the cosmetically acceptable criteria during the design process. Next, we do the research on the materials for protection helmet which will be manufacture. We had referred to the journals and related reference books. The material must satisfy the ASTM standard, such as tensile strength, abrasive resistance, young modulus and others. In addition, the material should easily fabricate and lower cost. The method we use to build the outer shell is plastic injection molding, this method is use the plastic from pellets or granules and heat it until melt. Then we push the melt into a split-die mold where can cool it at the shape design. Finally we open the mold and take out the part, the cycle is repeating. The wall thickness is a important key to use under this method, because the thick wall will take more time to cool and it will have greater the shrinking , but if the wall is thin so it will cool faster, the less shrinking. And we will use a drilling machine to make some hole to let the air can float out from the protective helmet. For the data collection, we compare mechanical properties, physical properties, thermal properties and chemical resistance between several polymers. From the comparing, we had chosen the polycarbonate as the outer surface of the POST-OP Protection Helmet because they are easily worked, moulded, thermoformed and good in mechanical properties. However, for the inner padding, we choose EVA (Ethylene vinyl acetate) because light weight, easy to mould, odorless, glossy finish, and cheaper compared to natural rubber. It is good for deceleration impact energy. 3.2 Properties of the Material Properties of the outer shell Density 0.0397-0.0484 lb/in3 Water Absorption 0.05-0.7 % Hardness, Rockwell R 108-122 Tensile Strength, Ultimate 5800-12500 psi Charpy Impact 20.5-37.6 ft-lb/in2 Oxygen Index 21-34% Processing Temperature 473-585 °F Table 3.1 Properties of the inner padding Specific Density 0.93 TENSILE STRENGTH (psi) 2000 COMPRESSION STRENGTH (psi) 1450 IMPACT (IZOD ft. lbs/in) NB HARDNESS R40 Table 3.2 Figure 3.1 Plastic injection molding machine The material we choose to use for the outer shell is Polycarbonate Resin Thermoplastic 3414(40%GF). The properties of the material below this table: Youngs modulus, psi Shear modulus, psi Mass density,lb/in3 Thermal exp coef, 1in/in/F Ultimate tensile,psi 1400000 319000 0.05495 9.30E-06 27000 Ultimate compressive, psi Ultimate shear,psi Thermal conductivity, Btuin/hrft2F Specific heat,Btu/lb/F 21000 11000 1.53 0.25 Table 3.3 This material has good conductivity compare to other material like Polycarbonate Resin Thermoplastic 3413 (30%GF). So we choose this material. 3.3 The Design of the Protection Helmet Figure 3.2: Top view sutures Figure 3.3: Side view sutures From the picture above, that was several type of wound, the design of the protective helmet should not contact with the wound part and provide ventilation for air circulation to faster the wound healing. The special of our design is the professionals working with patients needing head coverage after surgery can place positioning pads around the inside of the clear shell. In an area of recent surgery example, pads would be place around a wound or surgical site to keep helmet shell elevated and away from the affected area. Clear polycarbonate shell, edged with soft foam is then lined with self adhesive foam pads in various thicknesses, and ventilation holes are added. Suggestions for placement of the pads are included with the helmet. The helmet is made from thermoplastics polymer material that lightweight, lower cost, and has many high mechanical properties. The benefit of the transparent outer shell design is allows better supervision of the underlying wound and skull defect. The mat erial is crucial factor to this helmet because patient with head surgery need something that can feel very comfortable to their head. Material with least dense with be an awesome choice for them. The helmet also needs to have good mechanical properties to increase wear resistance. The helmet should be not has low strength and low hardness. The needed for these higher mechanical properties is to give protection of the head of the patients in abrasive environment. We should know that patients can be very stressful and lost control after a major head surgery. This is especially true in traumatic brain injury patients. They can bang their head to walls and the helmet should resist the forces from the banging in order to protect the head. So, in overall, the both material for inner and outer parts of the helmet were made from a very good mechanical properties polymers. Chapter 4: Result 4.1 Physical Architecture The design and chosen material was refer to functional, reliable, safety and costly. As we approached the data technique given by the ASTM standard this outcomes design would give very important benefits to us. Besides that, this most suitable material is to reduce the percentage of injury by the patient. The design we come out also very important, the outer surface material is hard, and the inner is comfortable and can absorb the high impact. The outer surface of the protection helmet using clear polycarbonate shell is easily to fabricate by the engineers. This outer surface gives the superior safety effectiveness to the patient. Figure 4.1 : Feature of Post-OP Protection Helmet Design 4.2 Logical Architecture From this post-Op helmet, the patient should refer by their doctor what kind of shape or where to put the EVA (Ethylene vinyl acetate) for inner surface on helmet as not to contact with the wound. The inner surface had a hollow part to avoid contact to the wound. The ventilations on the outer helmet help the air going in to contact the surface wound. This would help the wound healing more fasters. This also makes the patient head not feel hot and trapped with unwanted air thus make the heads skin get irritated. On the other hand, this helmet will give the amazing comfort, rugged durability, lightweight safety and stay-put in custom fit. The helmet would work great for patients post-surgery and the compliance is would be wonderful. CHAPTER 5: CONCLUSION Our design has many benefits to post-surgery patient throughout the world based on the advantages like: The helmet is made from thermoplastics polymer material that lightweight, lower cost, and has many high mechanical properties. The material is crucial factor to this helmet because patient with head surgery need something that can feel very comfortable to their head. Material with least dense with be an awesome choice for them. The helmet also needs to have good mechanical properties to increase wear resistance. The helmet should be not has low strength and low hardness. The needed for these higher mechanical properties is to give protection of the head of the patients in abrasive environmentWe should know that patients can be very stressful and lost control after a major head surgery. This is especially true in traumatic brain injury patients. They can bang their head to walls and the helmet should resist the forces from the banging in order to protect the head. So, in overall, the both material for inner and outer parts of the helmet were made from a very good mechanical properties polymers. The design of the helmet also makes a very good properties and advantage for the patient. The design of the helmet is ventilation, cosmetic acceptable and functional. It views same shape as our human head shape. So that, the patient can proceeds their normal life without . Strap was adjustable, in case of emergency, the strap can be easily remove and unlock. At the ear part, the part was uncover, so it was convenience to hearing and very comfortable. CHAPTER 6: Discussion The Post -op protection helmet is use to protect the patient from head injury after head surgery. Some of these have a high risk of falling due to multiple medical complication post op. Re-bleeding is the major complication and can cause further neurological deterioration. When the helmet collide something, inside the protective helmet have EVA (Ethylene vinyl acetate), it will absorb the energy produce from the collision and the EVA can increase the time between head and the outer shell collision, so the energy will hit the helmet will decrease and can protect the head from the injury. And the outer shell will have some holes so inside the protective helmet will ventilate and the patient will feel more fresh and comfortable. The outer shell is colour less is because like can let other people easily to know the head condition, so can confirm inside the protective helmet is safe. CHAPTER 7 : BIBILOGRAPHY: Barringer, William J. (2004). The Use of Postoperative Cranial Orthoses in the Management of Craniosynostosis. Journal of Prosthetic and Orthotic, 4S(16), 56-58. Retrieved September 9, 2009 from http://www.oandp.org/jpo/library/2004_04S_056.asp Fish, D. Lima, D. (2003). An Overview of Positional Plagiocephaly and Cranial Remolding Orthoses. Journal of Prosthetic and Orthotic, 2(15), 37-47. Retrieved September 9, 2009 from http:// www. oandp.org/jpo/library/2003_02_037.asp Ryan, S., Belbin,G., Slack,M., Naumann, S., Moran, D. (1992). Development of a Modular Design, Custom-Fitted Protective Helmet. Journal of Prosthetic and Orthotic, 4(4), 213-218. Retrieved September 9, 2009 from http://www.oandp.org/ jpo/library/1992_04_213.asp CHAPTER 8: Rehabilitation Medicine Unit 8.1 History The Department of Rehabilitation Medicine started as a section of the Department of Orthopaedic Surgery in 1965 under the headship of Professor Dr. J.F. Silva. Services provided were general physiotherapy, general occupational therapy and orthopaedic appliances service. The return of UMs pioneer Rehabilitation Physician from University of London in 1984, Dr. Zaliha Omar became a starting point for the development of rehabilitation services in the UMMC as well as in Malaysia. The first service to be introduced was the Rehabilitation Medicine consultation service which provided expert consultations in the fields of general rehabilitation. In addition, Rehabilitation Medicine was introduced as a subject in the undergraduate medical curriculum in 1984. In May 1995, the need to start Masters in Rehabilitation Medicine and Masters in Sports and Rehabilitation Medicine necessitated the shift of the rehabilitation section, from the Department of Orthopaedic Surgery to the Department of Allied Health Sciences and known as the Rehabilitation Sciences Unit. The Department of Allied Health Sciences then comprised of 2 units ie the Biomedical Science Unit and the Nursing Sciences Unit. By then, the scope of rehabilitation services along with the advancement in technology and increasing patient demand; saw a paradigm shift from being a general rehabilitation service provider to a specialized rehabilitation medicine service provider which emphasized on a multidisciplinary and interdisciplinary team approach. The first such service to be introduced was the Neuromedical Rehabilitation Service in 1991. This was followed by Spinal Rehabilitation (1992), Upper Limb and Hand Rehabilitation (1992) and Burns Rehabilitation (1992). The unit then went on to develop other specialised services and continue to upgrade existing services. These include Paediatric Neurodevelopmental Rehabilitation (1995), Prosthetic Orthotic Management Service, Wheelchair Management Service (1995), Amputee Rehabilitation (1996), Sports Rehabilitation (1998), Work Rehabilitation (1998), Wound Management and Diabetic Footcare (1998), Geriatric Rehabilitation (1999), Alternative Approaches to Rehabilitation Medicine (Acupuncture Service) in 1999, Neurosurgical Rehabilitation (2002), Womens Health (2002), Musculoskeletal Rehabilitation (2003) and Cardiac Rehabilitation (2006). The Rehabilitation Sciences Unit of the Department of Allied Health Sciences under the headship of Assoc Prof Dr. Zaliha Omar initiated 2 very important academic programmes in the country namely the Master of Sport Medicine and Rehabilitation in 1996 and Master of Rehabilitation Medicine in 1997. The early days of conducting 2 new programmes in relatively unknown fields posed numerous challenges but the unit received excellent support from various parties; other departments within the faculty as well as from the international arena.   One of the valuable contributions was from Professor Balasubramaniam from the National University of Singapore who was previously Head of Orthopaedic Surgery, Faculty of Medicine, University of Malaya from 1979 1982. Professor Bala was appointed Visiting Professor to the unit from 1997 to 2000 and as Chair for Tun Siti Hasmahs Chair for Rehabilitation and Sport Medicine from 2000 until 2003. The Rehabilitation Medicine Unit was also very fortunate to have collaboration with the University of Melbourne and 13 of its trainees underwent elective training of 6 to 12 months in Melbourne, Australia in various fields in rehabilitation medicine as part of the 4 year masters programme. The Rehabilitation Sciences Unit produced its first graduates in 2001, and to date have produced 17 rehabilitation physicians in Malaysia. The unit has also grown, from a one-man show ie Assoc Prof Dr. Zaliha Omar in the 80s and later in 1994 joined by Dr. Tunku Nor Taayah Tunku Zubir who left in 2001, it now has 6 academic staff and 1 trainee lecturer. The year 2005 saw the retirement of UMs as well as Malaysias rehabilitation medicine icon, Assoc Prof Dato Dr. Zaliha Omar from the academic arena. However she still generously contributes her time to teaching and clinical work in UMMC as a visiting consultant. Current and Future Developments With the progress and expansion of the unit in both the academic and clinical fields, the Rehabilitation Sciences Unit put up a proposal in 2006 for the formation of the Department of Rehabilitation Medicine, a clinical department which is involved in teaching, clinical service and research. With the formation of the Department of Rehabilitation Medicine and the formalization of the merger of its academic (FOM) and clinical services (UMMC) it is hoped that the field of Rehabilitation Medicine and its multidisciplinary components is better understood and its image and function more prominent. Apart from strengthening and optimizing current clinical services, the department also plans to introduce new services as well as collaborate with other departments in the areas of vestibular rehabilitation, pulmonary rehabilitation, chronic pain management, rheumatological rehabilitation, lymphoedema management service and others. As rehabilitation medicine is a multidisciplinary discipline, the department has put in its long-term planning, academic programmes in the areas of Prosthetics and Orthotics (in collaboration with Department of Biomedical Engineering, Faculty of Engineering, University of Malaya), Occupational Therapy, Physiotherapy and other related fields. The department currently has 20 trainees in rehabilitation medicine who go through a 4 year clinical master programme which also incorporates a research component. With the expansion of clinical services and the increasing number of trainees in the Master of Rehabilitation Medicine programme, the department is constantly reinforcing its faculty and other staff members. The department is also very fortunate to be identified for further development in the form of a one-stop comprehensive rehabilitation medicine complex in the 9th Malaysia Plan. 8.2 Introduction of Department of Rehabilitation Medicine The Department of Rehabilitation Medicine was formed as part of the overall development of Faculty of Medicine and University of Malaya Medical Centre, Kuala Lumpur for the purpose of providing clinical services in rehabilitation medicine and to provide training in the various fields of rehabilitation medicine. Apart from providing a comprehensive rehabilitation medicine service involving Rehabilitation Physicians, Medical Trainees in Rehabilitation Medicine, Physiotherapists, Occupational Therapists, Nurses and Medical Social Workers, the department is actively involved in the education of Undergraduate and Postgraduate Medical Trainees, Undergraduate Nursing Students, Physiotherapy and Occupational Therapy Students from the Ministry of Health, MARA University of Technology as well as private academic institutions. Continuing Professional Development of our multidisciplinary team members is a regular activity of the department. Updates in Medical Rehabilitation are organised regularly for our staff as well as relevant parties from outside the UMMC. All categories of staff have ample opportunity to participate in their respective professional development through conferences as well as courses locally and internationally. 8.4 Vision The vision of the department is to become the centre of excellence in activities for the provision of services, education, training and research in rehabilitation medicine and in all associated specialities. 8.5 Mission The Rehabilitation Medicine Unit practices multidisciplinary and interdisciplinary team approach for patient management and demand a comprehensive and a holistic care based on the individual needs of a patient. The department also considers its mission to be the centre for continuing education, training and maintenance of professional standards for Doctors and Health Professionals of various specialities associated with rehabilitation medicine. To play a catalystic role in research and development of rehabilitation medicine in University of Malaya and the country. 8.6 Services 8.61 Clinical Services There includes: General Services, Rehabilitation Medicine Consultation, Physiotherapy, Occupational Therapy and Wheelchair Management Service 8.62 Specialized Services There includes: Specialty Clinics Rehabilitation Medicine Consultation Neuro-surgical Rehabilitation Neuro-medical Rehabilitation Diabetic Footcare and Wound Management Consultation Spinal Cord Injury Rehabilitation Amputee Rehabilitation Paediatric Neurodevelopmental Rehabilitation Geriatric Rehabilitation Sports Rehabilitation Upper Limb and Hand Rehabilitation Burns Rehabilitation Diabetic Footcare and Wound Management Orthotics and Prosthetics Pre-Driving Assessment Work Resettlement Psychosocial Rehabilitation Swallowing Musculoskeletal Rehabilitation Scoliosis Womens Health Cardiac Rehabilitation Wheelchair Seating Clinic Vestibular Rehabilitation 8.7 Support Group Activities Apart from providing the core rehabilitation services, the Department of Rehabilitation Medicine is also involved in co-ordinating various activities such as the following

Wednesday, September 4, 2019

Education Reinforces the Race Disparity in Adventures of Huckleberry Fi

â€Å"Education is a dependent, inter-acting unit of the whole culture. Indeed, it lies at the heart of the culture, and necessarily reflects the contending values which there prevail,† writes Doxey A. Wilkerson, the associate professor of education at the Yeshiva University of New York, in the foreword for Carter Woodson’s The Education of the Negro Prior to 1861. Education, as posited by Wilkerson, represents a cultural construct, liable to change as people change, rather than a historical absolute, constant over time. The community determines the value, and the accessibility of this institution of knowledge. The communities created in Mark Twain’s Adventures of Huckleberry Finn and Langston Hughes’ Not Without Laughter also establish the importance of education. Huckleberry Finn, the white male adolescent protagonist of Adventures of Huckleberry Finn, and Sandy Rogers, the black male adolescent protagonist of Not Without Laughter, both question the necessity of formal education. However, in the end, Huck, advantaged because he is a white male, successfully abandons, unequivocally, all constraints of society, including education, while Sandy turns to formal education, attempting to use it as an equalizer against racial discrimination. The novels, Adventures of Huckleberry Finn and Not Without Laughter, reinforce the racial disparity between whites and blacks by creating communities that undermine the value of education, and determine each race’s ability to succeed without formal education. In each of the novels, the communities established by Twain and Hughes, define the characteristics prevalent in their societies. Huck Finn’s river community, for example, encompasses the aristocracy, the poor whites, the pseudo-intellectuals, an... ... and accessibility of this institution of knowledge through their status as prescribers and models for their society. The black race, on the other hand, requires extensive formal education to succeed in a world ruled by the white race. Huck Finn and Sandy Rogers embody the aspirations and beliefs of the race they identify with and compound the racial tensions through their experiences. Works Cited Hughes, Langston. Not Without Laughter. Mineola, NY: Dover Publications, 2007. Print. Pollak, Louis H. "Race, Law & History: the Supreme Court from "Dred Scott" to "Grutter v. Bollinger"" Daedalus 134.1 (2005): 35-41. Print. Twain, Mark. The Adventures of Huckleberry Finn. New York, N.Y.: Barnes & Noble, 2003. Print. Wilkerson, Doxey A. Foreword. The Education of the Negro Prior to 1861. By Carter Godwin Woodson. New York, NY: Arno, 1968. Not Numbered. Print.

Tuesday, September 3, 2019

Progression of Photography Essay -- History of Photography

Photography is an affection, a craving and an addiction. It is impossible to explain why people love taking photos, but once people are engaged in photography professionally, nothing will stop them. It has always been a great magic and momentous secret which opens the world to the people, which makes us look at the things used to be taken for granted with special attitude, which makes us ponder over the existing problems. Photography can truly be considered a magical act – here is a little black box that can capture the images of people and wild animals, strange places, and loved ones on a rectangular piece of paper that can be viewed days and years later. This is a visual trick that never ceases to delight the members of the audience, the magician most of all (Watson 78). Photography not only depicts life but also reveals things which are usually hidden behind our indifference, business, and pursuit for money. The word photography comes from two ancient Greek words: photo, for "light," and graph, for "drawing"(The History of Photography). "Drawing with light" is an apt way of describing the artistic field of photography. According to a world-renowned photographer, Ansel Adams, â€Å"You don’t take a photograph, you create it.† Each time a photograph is made, light or some other form of radiant energy, such as x-rays, is used to record an image of an object or scene on a light-sensitive surface at a specific time point (Watson 79). In the infancy of photography these recorded images were called sun pictures or heliograph. This was because sunlight was used to create the image. Mankind has been recording images at since the cave paintings of some 20,000 years ago. With the invention of photography, a realistic image that would have ta... ...ain — thereby giving you the ability to experiment with your photos in a way which was never possible with the film camera. So now most of the processing is electronic in the form of 0s and 1s as opposed to the mechanical and chemical operation in the traditional cameras. The cameras that operate based on this principle are known as digital cameras and the art of making digital images is called digital photography. Works Cited "Digital Photography." Digital - Photography - Tips. Web. 18 Feb. 2011. http://www.digital-photography-tips.net/history-of-digital-phtography-early-days.html. "History of Photography." About Inventors. About.com, Web. 17 Feb. 2011. http://inventors.about.com/od/pstartinventionsa/stillphotography.html. "What is Digital Photography." Make Use Of. Web. 16 Feb. 2011. www.makeuseof.com/tag/technology-explained-digital-photography/.

Monday, September 2, 2019

Communism and America :: Communism Essays

The word communism has always been a sort of taboo word to say. Even today we call people commies to make fun or tease people. Why did all this start? How did communism become a bad a word? Well communism has always been feared since the birth of our nation. It was the form of government that the majority of Americans did not want. Communism is basically a theory or system based on the ownership of all property and goods by the community as a whole. This system would destroy a lot of the liberties that we as Americans enjoy. There was a certain time period where extremely paranoid about the communist party taking control. Starting at about the 1920’s up until the 1950’s people really feared communism. The Cold War, Ronald Reagan, and the Red Scare were all major contributors in the unreasonable fear of communism during this time period. These three factors helped shaped America’s ideology about communism during this time period.   Ã‚  Ã‚  Ã‚  Ã‚   The Cold War put us on the brink of war with the Soviet Union. This could have possibly been the one thing that started the fear of communism. Russian spies are everywhere. People suspected each other, even their neighbors. Since the soviet Union was a communist country that was spreading it’s influence in Europe. America had to do something about it. America felt that the people living in the Soviet Union were being oppressed and needed to be free. This so called war was basically seeing how far both the countries, (America & Soviet Union) could go without going into war. Examples of this would be the Truman doctrine, which was Truman’s way of making sure Greece and Turkey would not become a communist country (N.N.787). Another example would be the Marshall Plan, which asked the countries that needed help request it and the US would help. America did not want the Soviets to spread their ideas to other countries by exploiting the dissatisfaction of their country. So we helped because we thought that our country was in trouble from the communists (N.N.787). An even better example of clashes between the US and the Soviet Union would be the Berlin Airlift. Soviets blocked off all land into Berlin and we airlifted supplies into Berlin. Now during this at home, there were many people scared of communism also. Many were accused communists due to the Red Scare.

Sunday, September 1, 2019

Contextual Differences Analysis of the Differences between Fassbinder’s All That Heaven Allows and Sirk’s Ali

The high price of gas at the pump has many Americans looking for alternates to their gas powered vehicles. One of the most popular option right now is a hybrid vehicle. The question that comes to mind is, are hybrid vehicles worth it? With record high gas prices due to the price of oil, most car owners out there have major concerns over their gas usage. Over the past ten years, the cost of gasoline has grown 250%! The price of oil has doubled since January of this year. The high prices of oil and gas is the driving factor for most of the people to trade their gas powered vehicles for hybrid vehicles.These vehicles promise to give consumers more mileage per gallon, the truth is that only a few vehicles currently in the market actually make any sort of financial sense. There are quite a few issues with buying hybrid vehicles, even with gas prices at more than $4 a gallon. First, these vehicles are much higher in price than their gas powered counter part so, the premiums attached to the ir price tags do not justify extra mileage that you get. In some cases car dealers are selling popular vehicles at much higher prices than MSRP.Second, there are no laws and regulations controlling the technology, price, and the mileage per gallon required out of these vehicles. Currently, there are hybrid vehicles in the market that offer an improvement of 3MPG to 18 MPG over their gas powered counterpart. This is a huge range that needs to be controlled. Third, the demand of these vehicles is driving the prices of the vehicles even higher, if people knew that it would take many years for fuel savings to pay back the hybrid premium on many models, the demand on these models would be much lower, driving the prices down.The solutions that I would like to propose is the government to work with auto manufacturers to develop a standard for hybrid vehicles. This standard should control the minimum mileage offered per gallon, and control the premium allowed to be charged by the manufactur ers. There are vehicles in the market that offer only a marginal benefit over the gas powered vehicles and yet the manufacturers charge thousands of dollars premium. Background: Today people all around the world are facing unusually high oil price hikes.Oil has become so very expensive that people are trying all kinds of extreme measures to lower the price. The hike in price has affected every nation; the entire world is trying to find a way out of the soaring prices. Thanks to the oil prices, travel expenses have increased, not just flying being expensive, driving your own car is very expensive. The chart below shows a trend in oil prices since 1990 with some of the major events leading to this increase. Note that since January of 2007 the oil prices have increase by 162%.With high gas prices, hybrid cars are a more affordable option than ever in terms of gas mileage, but only a handful of hybrid cars make solid financial sense, and only for some consumers, according to a new study by NADAguides. com, a vehicle pricing and information website. Using current gas prices for ten major metropolitan areas, the company studied the number of miles needed to recoup the extra cost of buying a hybrid car over its gasoline-only counterpart.The study showed, for example, that a driver in Los Angeles, the city with the highest gas prices in the study, will break even about 18 percent faster than a driver in Houston, the city with the lowest gas prices, assuming both are driving the same miles. The study found that, even at today's high gas prices, only a handful of hybrid cars make financial sense for a consumer who buys a new car every five years or less and drives an average number of miles per year.Even at Los Angeles-area gas prices, there are only five hybrid cars that would allow consumers to recoup their additional investment before they sold the car, assuming they drive an average of 15,000 miles per year. In order of shortest time to break even, they are: 1. Toyo ta Camry Hybrid 2. Chevrolet Malibu Hybrid 3. Nissan Altima Hybrid 4. Toyota Prius 5. Honda Civic Hybrid Following is a chart of the top five hybrid cars with the greatest return on investment and the number of miles to break even in 10 major metropolitan areas at current gas prices.Issue: Even with gas prices at more than $4 per gallon, there are quite a few issues with buying hybrid vehicles. Issue 1: High Prices Hybrid vehicle prices are higher than their gas powered counterpart. The demand for these vehicles in the last year has increased a lot, increasing the prices even further. In some areas people are actually paying premium over MSRP and waiting for more than two years to get some vehicles.The price premium attached to the hybrid vehicles are just too great to be considered a cost savings relative to purchasing their gasoline counterpart. If people knew how long it would take them to pay off the increased premium the demand for the hybrid would be lower than what it is now, decreasing the prices. Issue 2: High Prices The second issue with the hybrid vehicles is that there are no laws and regulations controlling the technology, price, and the mileage per gallon required out of these vehicles.Currently, there are hybrid vehicles in the market that offer an improvement of just a few miles per gallon over their gas powered counterpart, yet the manufacturers are charging thousands more for the premium for a so called hybrid technology. The table shows the amount of time it would take a buyer to offset the hybrid premium by fuel savings. The table also shows the miles per gallon and annual gas savings. These numbers clearly show the need to have some regulations to control the miles per gallon offered and the amount of premium that is charged by the manufacturers.Let’s look at some vehicles: Starting with the worst of the bunch, the Lexus LS600H. The premium charges on this vehicle is about $19,000, yet it only offers about 20 to 22 miles per gallon. It would take almost a century to break even. The next worst seems to be the Saturn Aura which only offers an annual gas savings of $171. The best one seems to Toyota Prius, but this car is so popular these days that in some areas there is a wait list of two years. In areas where it’s available, the dealers are charging more than $5,000 over MSRP.Solution: ?Better education to customers about the ownership costs of a hybrid vehicle ? Government should offer incentives like tax break to buy hybrid vehicles ? Have a standard to develop hybrid vehicle to encourage mass production, bringing the vehicle prices to even less than current gas-powered vehicles ? Force auto makers to sell hybrid vehicles at no more than, about 10%, premium to the customers Conclusion: Reference: Web Site: Bespoke Investing Group – http://bespokeinvest. typepad. com/bespoke/

Orgnization Behavior

RSM 260 Practice Final Exam Multiple Choice (30 points, 3 points each) 1. What is the first step in the Rational Decision-Making Model? a. developing alternatives b. identifying the problem c. identifying the decision criteria d. weighing the decision criteria e. collecting relevant data 2. Which of the following is not true of charismatic leaders? a. They have a vision and the ability to articulate the vision. b. They have behavior that is unconventional. c. They are willing to take high personal risk. d. They exhibit behaviors that are consistent with their followers’ behaviors. . all of the above are true 3. What sort of groups are defined by the organization’s structure? a. informal b. task c. friendship d. interest e. formal 4. Most people assume that a police officer should behave in a lawful manner, and not show any favoritism to any particular group, and do their best to uphold the law. What term is used for this kind of belief? a. a norm b. a norm identity c. a role expectation d. a role perception e. a norm violation 5. What term is used for the tendency for individuals to spend less effort when working collectively? a. groupthink . the rule of diminishing returns c. social loafing d. groupshift e. clustering 6. Leaders achieve goals, and power is _____. a. defined by leaders’ hopes and aspirations b. usually used by poor leaders c. a means of achieving goals d. a goal in and of itself e. a strong influence on leaders’ goals 7. One reacts to _____ power out of fear of the negative ramifications that might result if one fails to comply. a. legitimate b. coercive c. punitive d. referent e. abusive 8. Which of the following is not an assumption of the rational decision-making model? . The decision maker is constrained by time and costs. b. The decision criteria are constant and the weights assigned to them are stable over time. c. The decision maker can identify all the relevant criteria and can list all the viable alternative s. d. The decision maker is aware of all the possible consequences of each alternative. e. The decision maker is assumed to have complete information regarding the decision situation. 9. The example of labor-management negotiations over wages exemplifies _____ bargaining. a. integrative . reflective c. distributive d. restrictive e. affective 10. Your _____ determines the lowest value acceptable to you for a negotiated agreement. a. BATNA b. margin of error c. bid price d. asking price e. hidden value 5 POINTS: Describe one concept/theory from your OB course that you find most useful/interesting. How does it apply to your work/life? Be sure to include examples and definitions. CASE-related questions Starbucks and the â€Å"Bean Stock† –courtesy of George & Jones, Organizational Behavior, third edition, 2000 Howard Schultz, CEO of Starbucks, bought the company in 1987 and transformed a local Seattle, Washington chain of six coffee stores into a national, publicly owned company with over 25,000 employees and over 1,500 stores. Starbucks’ sales and profit growth have been phenomenal and the company has changed the way that Americans think about coffee. Starbucks’ stores range from coffee carts in crowded city streets to intimate coffee bars to full-sized restaurants that sell espressos and cappuccinos as well as coffee by the pound, coffee-making equipment, and food items. Starbucks was recently ranked in the top 75 global brands in a study conducted by the consulting firm, Interbrand. Throughout Starbucks’ rapid growth, Schultz has emphasized the importance of rewarding employees for contributions they make to Starbucks and ensuring that they have the necessary training to be effective. In 1991, when Starbucks was still a privately owned company, Schultz and other top managers came up with an innovative type of reward to encourage employees to behave in ways that would contribute to Starbucks’ growth and profitability. Starbucks made all employees partners by granting them stock options, which could be turned into stock when the company went public. If the company did well, employees themselves would benefit as their options would be worth more money. Called â€Å"Bean Stock,† the options cause employees to behave in ways to increase their profitability. Employees thought of new ways to lower costs and increase sales, ranging from staying overnight on Saturdays when traveling on business to lower the cost of airfares to finding better ways to communicate with customers. Starbucks went public in 1992 and employees have since been rewarded for their efforts. For example, an employee who earned $20,000 a year in 1991 received options that had a value of $50,000 in 1996. Starbucks continues to give its employees stock options through is Bean Stock plan. Under the plan, employees can cash in their options after keeping them for five years. Starbucks also provides extensive customer service training to employees to ensure that they are knowledgeable and confident on the job and feel capable of making decisions on their own to better serve customers. Store managers teach classes on topics such as coffee history and coffee brewing at home and employees must take a minimum of 24 hours of training. Employees learn how to take orders and prepare various coffees in a company training room rather than on the job (like in most restaurants) so that they can fully absorb what they are learning, without the stress of waiting on real customers, and receive extensive feedback. Customers then constantly receive the excellent service they have come to expect from Starbucks. Short-Answer Questions (5-8 sentences answer 15 POINTS EACH) Be sure to state which questions you are answering, and specifically define any theories/ concepts/traits that you use in your answer! 1. What type of leadership has Schultz demonstrated here? 2. What is the role of Schultz in motivating his employees? What motivation theory is he using? ESSAY QUESTIONS (35 POINTS TOTAL): 1. What are two ways to increase group performance that you have learned about in this half of the semester (after the midterm)? Be sure to describe oth the concepts/theories and give a specific example of each. (5 points) 2. Congratulations—you have just gotten a job offer! But, they have offered you less money than you wanted, and more benefits than you need. Describe your negotiation strategy, telling me about two tactics that you will use, and describe your sources of power in this situation. Also, be sure to mention one thing that could influence your ethical/unethical behavior in this situatio n, and how. (10 points) 3. You have accepted the job and you are now a manager at a product design company. Your boss just told you that need to develop a new consumer product by the end of the year. You’re unsure if you should assemble a group of people to do this, or assign it to an individual—you’ve heard about biases at the group level, as well as benefits about group level decision making. You also know about decision making biases that can happen in individuals, and the benefits of individuals making decisions. Discuss BOTH sides of the issue, detailing each of these things, so that you can then make an informed, rational decision—finally, which do you recommend to your boss? (20 points)